SL smart

All subsequent bench, seating and storage elements are already equipped with a system support and 2 feet and can be lined up endlessly at the same depth.

When planning with elements, do the following:
First select the desired seat height by choosing one of the foot versions F3, F2 or F1. Now select the elements you need for your configuration. The corner, T, crossing and storage elements are suitable for all seat versions and already equipped with the required system carriers and feet. To attach a bench, seat or shelf element 80 cm deep to one of these elements or to a lounger, no further parts are required.

When attaching another bank, seat, or Ablagenslements only changes the position of the previous outermost system carrier to a position between the two outer elements. Again, no additional parts are needed.

If bench, seat or storage elements are installed as solitaires or in series, another system support with 2 feet is required.

As a rule, seat elements in the version with separate backrest and armrest module can be used on both sides. If angle modules or cover back modules are used, there are left and right end elements.

For lateral attachment of another single armrest, a length-fitting armrest module with system support and feet is required (backrest element).