All combinations and elements in the CLQ classic design are made up exclusively of modules with a grid width of 20 cm. Excluded are only corner elements and storage modules.
The combinations shown are complete and already equipped with all required system carriers, connectors and the corresponding number of feet. You only select the desired cover for the modules and the foot version. Further information can be found under the respective product picture.
The following elements allow you to plan in the usual way. The height under the elements refers exclusively to the height of the modules. Please note the further planning instructions, as well as the information on seat height and foot options.
planning notes
All elements in the CLQ classic version are already equipped with 2 system carriers and F1 feet. They can be used as a solitaire or combined as desired by means of connecting elements. The arrangement of the individual modules within an element can be changed according to the grid. It is important that the outer surfaces of the outer modules are covered in real. Please note the information on height and seat height. For compilations of aligned elements, we recommend an execution in foot height F1, alternatively with roll.
Seat surface heights and Feet variants
The height of the seat/configuration is determined by the choice of feet.
The following feet variants are available for the differing seat heights.
| Material Surface/colour | aluminium polished | aluminium brushed | aluminium matt black | nickel-black-plastic |
|---|---|---|---|---|
| Seat height 45 cm |  F3/AP |
 F3/AG |
 F3/PS |
 R3 |
| Seat height 40 cm |  F2/AP |
 F2/AG |
 F2/PS |
 RW |
| Seat height 37 cm |  F1/AG |
 F1/PS |
 F1 |
CAD-Daten
CAD-Daten
CAD-Daten
CAD-Daten
CAD-Daten
CAD-Daten
CAD-Daten
CAD-Daten
CAD-Daten
CAD-Daten
CAD-Daten
